My-te Winch-Hoists

‘Accessories’

Sheave blocks and guide sheaves available for double-line lifting & pulling operations or for redirecting the path of the wire rope. All blocks and fixed sheaves are provided with quick release pins for easy rigging and replacement of sheaves.  All sheave blocks are provided with swivel hook and safety latch kit installed.

See chart below for more sheave blocks.

Part No. 148452
Bolts to My-te capstan winch-hoists in order to mount the unit to your vehicle’s 2″ receiver hitch. The mounting plate is shipped with hardware, but the receiver hitch pin is not included. Mounting plate may be used with any current frame style My-te capstan.

Works on any My-te hydraulic unit. Perfect solution when the operator’s hands must be free to handle the capstan’s rope or help direct loads. Enlarged diamond-plate base and a large reversible foot pedal are sturdy and easy to use when your eye needs to be on something else.

Part No. 468060

Designed for installation with My-te’s Capstan Series Winch-Hoists. Swivel mount bolts to your truck bed. Capstan winch frame bolts to swivel mount using tapped mounting holes. Winch rotation allows you to use your winch even when your truck is in an awkward location. Pin stop locks swivel base in one position.

Part No. 148331

Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation.  Ask for model 402AB for a dedicated pole mount capstan winch-hoist.

Part No. 148353

Two-position pedal switch on a 10′ cord. Available on 12-volt and 115-volt units in place of standard hand switch. Used where the operator’s hands must be free to handle the capstan’s rope or help direct loads.

Model 300AB w/foot switch shown.  Available as a factory option at no charge.

Part No. 154010
• 4″ diameter trolley wheel
• Includes threaded axle
Part No. 154020
• Heavy-duty
• 6″ diameter trolley wheel
• Includes threaded axle

Wire Rope Assemblies Available From My-te:

Part No. 828060 Shown:  3/8″ x 50′ Wire Rope Assembly with 1.5 Ton Hook Installed  There is no additional charge to have wire rope installed on My-te Winch-Hoists Replacement ropes available for your existing My-te Winch-Hoist Special ropes available on request

Also known as a roller fairlead: A must for pulling loads on an angle to the winch drum which would cause interference between the cable and the drum flanges.  Two horizontal and two vertical rollers mounted on a sturdy welded frame reduce cable and drum flange wear.  Easily mounts to any suraface.

Part No. 148320 (shown)
• Standard Model Nos. 10-12, 100AB
Part No. 771220
• Max Model Nos. AC36B, DC48 (factory-installed)