‘Factory Installed Options’
771150 Drum
(as part only #068110)
• Model Nos. AC36B, DC48
• Drum storage on each half:
1/4″ – 121′, 5/16″ – 77′, 3/8″ – 53′
771070 Drum
Offers the advantage of faster line speeds than standard drum. Recommended for operations requiring no more than 75% load capacity.
(as part only #068040)
• Model Nos. 10-12, 100AB, 500, 501
• Drum storage:
3/16″ – 235′, 1/4″ – 130′, 5/16″ – 85′
• Single-line capacity of 950 lbs
on Model No. 10-12
• Single-line capacity of 750 lbs
on Model Nos. 100AB, 500, 501
771060 Drum
Replaces 068140 drum when operation calls for two lifting or pulling points.
(as part only #068020)
• Model Nos. 10-12, 100AB, 500,
501, 510, 520
• Drum storage on each half:
3/16″ – 250′, 1/4″ – 140′, 5/16″ – 85′
771050 Drum
| All-steel fabricated drum replaces standard 068140 drum where longer cable lengths are required or for extra protection from cable riding over flanges. |
Drums
 |
Overall length of winch is increased by 5″. Overall height is increased by 1″. Do not exceed the duty cycle of the winch when using this drum option. Lifting capacity with a full drum of cable is 25% of the first layer capacity. |
Clutch
Specify Option #771010
 |
For operations requiring fast, no-load cable pull-off. Best in horizontal dragging applications for getting the cable out to the load quickly. |
• Model Nos. 100AB, 150AB, AC36
• Not recommended for lifting applications.
Variable Speed Options
 |
For applications where speed control is required, motor speed may be adjusted on the fly. Current limiter protects motor; full torque available even at slowest speeds. This option may be combined with other options to customize the winch to your needs. |
Upside-Down Mounting
| For any operation where winch is overhead and base is upside down. Frame comes with shackle for double-line operation. Spur gear housing is laid over 90° to maintain proper oil level. No clutch only. |
Limit Switch
 |
The limit switch option overrides the push botton control to limit travel in the ‘in’ and/or ‘out’ direction. Field adjustable for up to 100′ of travel. Limit switch controls only for use with customer-supplied pendant stations or cut off switches. |
Hand Crank
 |
Provides an emergency procedure for moving loads during power failure. Removable crank fits on square end of the special worm shaft, which extends through the spur gear housing. |