My-te Winch-Hoists » Factory Installed Options

771150 Drum

admin — Wed, 31 Mar 2010 22:07:31 +0000

(as part only #068110)

• Model Nos. AC36B, DC48
• Drum storage on each half:
1/4″ – 121′, 5/16″ – 77′, 3/8″ – 53′

771070 Drum

admin — Wed, 31 Mar 2010 22:04:55 +0000

Offers the advantage of faster line speeds than standard drum. Recommended for operations requiring no more than 75% load capacity.

(as part only #068040)

• Model Nos. 10-12, 100AB, 500, 501
• Drum storage:
3/16″ – 235′, 1/4″ – 130′, 5/16″ – 85′
• Single-line capacity of 950 lbs
on Model No. 10-12
• Single-line capacity of 750 lbs
on Model Nos. 100AB, 500, 501

771060 Drum

admin — Wed, 31 Mar 2010 22:03:37 +0000

Replaces 068140 drum when operation calls for two lifting or pulling points.

(as part only #068020)

• Model Nos. 10-12, 100AB, 500,
501, 510, 520
• Drum storage on each half:
3/16″ – 250′, 1/4″ – 140′, 5/16″ – 85′

771050 Drum

admin — Wed, 31 Mar 2010 22:01:01 +0000

All-steel fabricated drum replaces standard 068140 drum where longer cable lengths are required or for extra protection from cable riding over flanges.

(as part only #068010)

• Model Nos. 10-12, 100A, 500,
501, 510, 520
• Drum storage:
3/16” – 515’, 1/4” – 290’, 5/16” – 185’

Drums

admin — Wed, 31 Mar 2010 21:57:56 +0000

Overall length of winch is increased by 5″. Overall height is increased by 1″. Do not exceed the duty cycle of the winch when using this drum option. Lifting capacity with a full drum of cable is 25% of the first layer capacity.

771072 Drum

771073 Drum

• Model Nos. 10-12, 100AB, HY1, 500,
501, 510, 520

• Drum storage: 771072
1/8” – 3200’, 3/16” – 1425’, 1/4” – 800’,
5/16” – 500’

• Drum storage: 771073
1/8” – 2600’, 3/16” – 1150’, 1/4” – 650’,
5/16” – 400’

Clutch

admin — Wed, 31 Mar 2010 21:54:35 +0000

Specify Option #771010

For operations requiring fast, no-load cable pull-off. Best in horizontal dragging applications for getting the cable out to the load quickly.

• Model Nos. 100AB, 150AB, AC36

• Not recommended for lifting applications.

Variable Speed Options

admin — Wed, 31 Mar 2010 21:41:10 +0000

For applications where speed control is required, motor speed may be adjusted on the fly. Current limiter protects motor; full torque available even at slowest speeds. This option may be combined with other options to customize the winch to your needs.

Specify Option #771310

Variable speed with controls at unit – No pendant
Not compatable with brake motor.
Shown Above (Left)

Specify Option #771320

10′ pendant control standard.
Available on Model Nos. 100AB, AC36B, 300AB, 800AB
Pendant Only Shown Above (right)

Upside-Down Mounting

admin — Wed, 31 Mar 2010 21:34:35 +0000

For any operation where winch is overhead and base is upside down. Frame comes with shackle for double-line operation. Spur gear housing is laid over 90° to maintain proper oil level. No clutch only.

Specify Option #771110

• Model Nos. 10-12, 20-12, 100AB,
150AB, AC36B, DC48

Limit Switch

admin — Wed, 31 Mar 2010 21:21:17 +0000

The limit switch option overrides the push button control to limit travel in the ‘in’ and/or ‘out’ direction. Field adjustable for up to 100′ of travel. Limit switch ‘controls only’ are for use with customer-supplied pendant stations or cut off switches. Upper limit only available as well.

Specify Option #771080:

Standard, I-Beam, Versatile Series

Specify Option #771090:

Limit switch controls only

Specify Option #771091:

Max Series

Specify Option #771291:

Upper Limit Switch Only

Hand Crank

admin — Wed, 31 Mar 2010 21:12:41 +0000

Provides an emergency procedure for moving loads during power failure. Removable crank fits on square end of the special worm shaft, which extends through the spur gear housing.

Specify Option #771020
• Model Nos. 10-12, 20-12,100AB, 150AB

• 30:1 reduction on crank