The limit switch option overrides the push button control to limit travel in the ‘in’ and/or ‘out’ direction. Field adjustable for up to 100′ of travel. Limit switch ‘controls only’ are for use with customer-supplied pendant stations or cut off switches. Upper limit only available as well.
Specify Option #771080:
- Standard, I-Beam, Versatile Series
Specify Option #771090:
- Limit switch controls only
Specify Option #771091:
- Max Series
Specify Option #771291:
- Upper Limit Switch Only
Variable Speed Options
For applications where speed control is required, motor speed may be adjusted on the fly. Current limiter protects motor; full torque available even at slowest speeds. This option may be combined with other options to customize the winch to your needs.
Specify Option #771310
- Variable speed with controls at unit – No pendant
- Not compatable with brake motor.
- Shown Above (Left)
Specify Option #771320
- 10′ pendant control standard.
- Available on Model Nos. 100AB, AC36B, 300AB, 800AB
- Pendant Only Shown Above (right)
Overall length of winch is increased by 5″. Overall height is increased by 1″. Do not exceed the duty cycle of the winch when using this drum option. Lifting capacity with a full drum of cable is 25% of the first layer capacity.
- Model Nos. 10-12, 100AB, HY1, 500, 501, 510, 520
- Drum storage: 771072
1/8” – 3200’, 3/16” – 1425’, 1/4” – 800’, 5/16” – 500’
- Drum storage: 771073
1/8” – 2600’, 3/16” – 1150’, 1/4” – 650’, 5/16” – 400’
Offers the advantage of faster line speeds than standard drum. Recommended for operations requiring no more than 75% load capacity.
(as part only #068040)
- Model Nos. 10-12, 100AB, 500, 501
- Drum storage:
3/16″ – 235′, 1/4″ – 130′, 5/16″ – 85′
- Single-line capacity of 950 lbs
on Model No. 10-12
- Single-line capacity of 750 lbs
on Model Nos. 100AB, 500, 501
Sheave blocks and guide sheaves available for double-line lifting & pulling operations or for redirecting the path of the wire rope. All blocks and fixed sheaves are provided with quick release pins for easy rigging and replacement of sheaves. All sheave blocks are provided with swivel hook and safety latch kit installed.
See chart below for more sheave blocks.
|818010||3000 Lb. Capacity Sheave Block for standard & versatile series models. Use with 1/4″ or 5/16″ rope.|
|818020||6000 Lb. Capacity Sheave Block for max series models. Use with 5/16″ or 3/8″ rope.|
|811010||4″ Sheave Only– 1/2″ bore w/bronze bushing – for 1/4″ or 5/16″ rope|
|811020||6″ Sheave Only– 3/4″ bore w/bronze bushing – for 5/16″ or 3/8″ rope|
|818040||4″ Sheave with mounting bracket – for 1/4″ or 5/16″ rope|
|818050||6″ Sheave with mounting bracket – for 5/16″ or 3/8″ rope|
Hydraulic Foot Control Valve
Part No. 468060
Works on any My-te hydraulic unit. Perfect solution when the operator’s hands must be free to handle the capstan’s rope or help direct loads. Enlarged diamond-plate base and a large reversible foot pedal are sturdy and easy to use when your eye needs to be on something else.
Part No. 148331
Designed for installation with My-te’s Capstan Series Winch-Hoists. Swivel mount bolts to your truck bed. Capstan winch frame bolts to swivel mount using tapped mounting holes. Winch rotation allows you to use your winch even when your truck is in an awkward location. Pin stop locks swivel base in one position.
Part No. 148353
Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation. Ask for model 402AB for a dedicated pole mount capstan winch-hoist.
Cables & Fittings
Part No. 828060
Shown: 3/8″ x 50′ Wire Rope Assembly with 1.5 Ton Hook Installed
- There is no additional charge to have wire rope installed on My-te Winch-Hoists
- Replacement ropes available for your existing My-te Winch-Hoist
- Special ropes available on request
|Part No.||Description||Breaking Strength|
|821010||1/8″ – 7×19 Preformed galvanized aircraft cable||2,000 lb.|
|821020||3/16′ – 7×19 Preformed galvanized aircraft cable||4,200 lb.|
|821030||1/4″ – 7×19 Preformed galvanized aircraft cable||7,000 lb.|
|828050||Swivel hook and safety latch – one-ton rated capacity|
|828010||Standard cable hook with safety latch – one ton rated capacity|
|828110||Eye installed with nicopress – 1/8″, 3/16″, 1/4″ cable sizes|
|828210||Cable assembly 1/4″ x 50′ with one-ton hook|
|828220||Cable assembly 1/4″ x 125′ with one-ton hook|
|828230||Cable assembly 1/4″ x 250′ with one-ton hook|
|828240||Cable assembly 5/16″ x 100′ with one-ton hook|
|828250||Cable assembly 5/16″ x 150′ with one-ton hook|
|828260||Cable assembly 3/8″ x 50′ with 1.5 ton hook|
|828270||Cable assembly 3/8″ x 110′ with 1.5 ton hook|
Also known as a roller fairlead: A must for pulling loads on an angle to the winch drum which would cause interference between the cable and the drum flanges. Two horizontal and two vertical rollers mounted on a sturdy welded frame reduce cable and drum flange wear. Easily mounts to any suraface.
Part No. 148320 (shown)
- Standard Model Nos. 10-12, 100AB
- Part No. 771220
- Max Model Nos. AC36B, DC48 (factory-installed)