771150 Drum

(as part only #068110)

• Model Nos. AC36B, DC48
• Drum storage on each half:
  1/4″ – 121′, 5/16″ – 77′, 3/8″ – 53′

771070 Drum

Offers the advantage of faster line speeds than standard drum. Recommended for operations requiring no more than 75% load capacity.

(as part only #068040)

• Model Nos. 10-12, 100AB, 500, 501
• Drum storage:
  3/16″ – 235′, 1/4″ – 130′, 5/16″ – 85′
• Single-line capacity of 950 lbs
  on Model No. 10-12
• Single-line capacity of 750 lbs
  on Model Nos. 100AB, 500, 501

771060 Drum

Replaces 068140 drum when operation calls for two lifting or pulling points.

(as part only #068020)

• Model Nos. 10-12, 100AB, 500, 501, 510, 520
• Drum storage on each half:
  3/16″ x 250′, 1/4″ x 140′, 5/16″ x 85′

771050 Drum

All-steel fabricated drum replaces standard 068140 drum where longer cable lengths are required or for extra protection from cable riding over flanges.

(as part only #068010)

• Model Nos. 10-12, 100A, 500, 501, 510, 520
• Drum storage:
  3/16” – 515’, 1/4” – 290’, 5/16” – 185’

Drums

Overall length of winch is increased by 5″. Overall height is increased by 1″. Do not exceed the duty cycle of the winch when using this drum option. Lifting capacity with a full drum of cable is 25% of the first layer capacity.

• Model Nos. 10-12, 100AB, HY1, 500, 501, 510, 520
• Drum storage: 771072
  1/8” – 3200’, 3/16” – 1425’, 1/4” – 800’, 5/16” – 500’
• Drum storage: 771073
  1/8” – 2600’, 3/16” – 1150’, 1/4” – 650’, 5/16” – 400’

Clutch

For operations requiring fast, no-load cable pull-off. Best in horizontal dragging applications for getting the cable out to the load quickly.

Specify Option #771010

• Model Nos. 100AB, 150AB, AC36
• Not recommended for lifting applications.

Variable Speed Options

For applications where speed control is required, motor speed may be adjusted on the fly. Current limiter protects motor; full torque available even at slowest speeds. This option may be combined with other options to customize the winch to your needs.

Specify Option #771310

• Variable speed with controls at unit – No pendant
• Not compatable with brake motor.
• Shown Above (Left) 

Specify Option #771320

• 10′ pendant control standard.
• Available on Model Nos. 100AB, AC36B, 300AB, 800AB 
• Pendant Only Shown Above (right)

Upside-Down Mounting

For any operation where winch is overhead and base is upside down. Frame comes with shackle for double-line operation. Spur gear housing is laid over 90° to maintain proper oil level. No clutch only.

Specify Option #771110

• Model Nos. 10-12, 20-12, 100AB, 150AB, AC36B, DC48

Limit Switch

The limit switch option overrides the push button control to limit travel in the ‘in’ and/or ‘out’ direction. Field adjustable for up to 100′ of travel. Limit switch ‘controls only’ are for use with customer-supplied pendant stations or cut off switches.  Upper limit only available as well. 

Specify Option #771080:

• Standard, I-Beam, Versatile Series

Specify Option #771090:

• Limit switch controls only

Specify Option #771091:

• Max Series

Specify Option #771291:

• Upper Limit Switch Only

Hand Crank

Provides an emergency procedure for moving loads during power failure. Removable crank fits on square end of the special worm shaft, which extends through the spur gear housing.

Specify Option #771020

• Model Nos. 10-12, 20-12,100AB, 150AB
• 30:1 reduction on crank

Sheave-Blocks-and-Guide-Sheaves

Sheave blocks and guide sheaves available for double-line lifting & pulling operations or for redirecting the path of the wire rope. All blocks and fixed sheaves are provided with quick release pins for easy rigging and replacement of sheaves.  All sheave blocks are provided with swivel hook and safety latch kit installed.

See chart below for more sheave blocks.

Receiver Hitch Mount

Part No. 148452

Bolts to My-te capstan winch-hoists in order to mount the unit to your vehicle’s 2″ receiver hitch. The mounting plate is shipped with hardware, but the receiver hitch pin is not included. Mounting plate may be used with any current frame style My-te capstan.

Hydraulic Foot Control Valve

Part No. 468060

Works on any My-te hydraulic unit. Perfect solution when the operator’s hands must be free to handle the capstan’s rope or help direct loads. Enlarged diamond-plate base and a large reversible foot pedal are sturdy and easy to use when your eye needs to be on something else.

Swivel Mount

Part No. 148331

Designed for installation with My-te’s Capstan Series Winch-Hoists. Swivel mount bolts to your truck bed. Capstan winch frame bolts to swivel mount using tapped mounting holes. Winch rotation allows you to use your winch even when your truck is in an awkward location. Pin stop locks swivel base in one position.

Pole-Mount-Adapter

Part No. 148353

Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation. Ask for model 402AB for a dedicated pole mount capstan winch-hoist.

Foot Switch Control

Two-position pedal switch on a 10′ cord. Available on 12-volt and 115-volt units in place of standard hand switch. Used where the operator’s hands must be free to handle the capstan’s rope or help direct loads.

Trolley Wheels

Part No. 154010

• 4″ diameter trolley wheel
• Includes threaded axle
• Part No. 154020
• Heavy-duty
• 6″ diameter trolley wheel
• Includes threaded axle

Cables & Fittings

Part No. 828060

Shown: 3/8″ x 50′ Wire Rope Assembly with 1.5 Ton Hook Installed

• There is no additional charge to have wire rope installed on My-te Winch-Hoists
• Replacement ropes available for your existing My-te Winch-Hoist
• Special ropes available on request 

Cable Guides

Also known as a roller fairlead: A must for pulling loads on an angle to the winch drum which would cause interference between the cable and the drum flanges.  Two horizontal and two vertical rollers mounted on a sturdy welded frame reduce cable and drum flange wear.  Easily mounts to any suraface.

Part No. 148320 (shown)

• Standard Model Nos. 10-12, 100AB
• Part No. 771220
• Max Model Nos. AC36B, DC48 (factory-installed)